These Vibrational Tools have many beneficial effects on the electrical potential of your skin, which is part of what acupuncture needles tap into. By emitting energies that are calculated to break down inharmonious energetic patterns, these Vibrational Tools load specific dissipative energy onto your skin and meridian channels. Simple in concept, simple and effective to use. An analogy is the tapping a drum. The energy exchange between the drum skin and the surrounding air is a transfer of vibration. The closest air is impacted the most because of its proximity. This air, or energy field hugs the drum skin like an energy envelope, like the skin on your body.
Just as most of the vibrational energy is transferred from the drum to the nearest air, most of your vibrational energy is loaded onto your skin. Because your skin is alive with nerve endings, glands and fluid exchange capacity, it is intimately connected to your central nervous system. Therefore, any negative energies surrounding your skin will involve your central nervous system. Further, your experiences have a profound electrical manifestation by way of your skin, to the energetic meridians of your body. Another simple analogy is back flushing any system.
The energy of the Tool is dominant, so that necessary positive energies (steady state patterns) are unaffected, while acquired negative energies (dissonant patterns) get eliminated. This Vibrational Tool has of 2 basic parts:
Composite BioDisk (made up of a Plain BioDisk and a BioQuark) and a Brass Plate.
Additional tools include Overlays (see descriptions below) that deliver specific vibrational information for one, or many different purposes. The BioDisk/Composite BioDisk  The BioDisk is a device that can both send and pull energy... an energetic "push-pull" device.
A special metal alloy disk (very thin and only 1" in diameter), the BioDisk is energized (using proprietary technology) into a permanent higher quantum state which makes it impervious to all external energies and cannot be altered or down energized by any means. The high "atomic spin state" polarizes the BioDisk, without any magnetic properties. This is an atomic polarity. The BioDisk is encoded with two distinct sets of biologically pertinent harmonics. The metal alloy disk inside the BioDisk is oriented so that the violet side (with the geometry) is the energy producing side, and accelerates energy away from the disk. The other side (with the rainbow target) draws energy into the disk.  The Brass Plate
The brass plate is simply a quantum resonant device, dependent on the brass
alloy composition inside the BioDisk and on the plate's precise dimensions. It establishes a harmonic bridge between the Composite BioDisk and the hypothalamic system in your body. This is why the dimensions of the plate are in a precise relationship to the thickness and diameter of the alloy in the BioDisk. The relationship between the BioDisk and brass plate is calculated to be a harmonic relationship between two different resonances. It is not a sound relationship. It is a quantum mechanical relationship. Therefore, it serves analogously as a wave guide for this energy. The difference between the two harmonics is something that is capable of exciting your hypothalamic system. The differential resonance actually puts the hypothalamus gland in a high state of readiness, like being put "on alert". In other words, it's a stimulant, a resonant or energetic stimulant to your hypothalamus. There are so many ways to use this solid state technology. We have begun putting all these methods down and will continue to share them. Please be patient. This is just the beginning... the best is yet to come. User Reports:
After wearing the BioDisk for three days and nights in a row, she woke up feeling emotionally exhausted. After consulting with Dan, he said that she was detoxing on an energetic level. She removed the BioDisk and was shortly back to her energetic self again. If worn properly-during the day only, purple side against the right hip-the user can avoid excess exposure to electromagnetic fields.
Directions for Use To get started, you need a Composite BioDisk (this may be made up of a Plain BioDisk and BioQuark), a Brass Plate in the middle, and an Overlay to deliver specific vibrational information (one or many for different purposes). These items are available in the Foundation Set, or you may purchase them separately.
Each user requires at least this Foundation Set plus some Overlays. A BioQuark goes in-between a Plain BioDisk and an Overlay. By itself, a BioQuark is useless. Only with Plain BioDisk and Overlay can its functions be delivered. Some people like to have multiple sets to treat multiple items (food, water) or multiple people. If you were treating a person, and wanted to treat some food or beverage at the same time, you would need another Plain BioDisk and BioQuark. Color Gels are used to amplify the action of specific Overlays, but not all Overlays benefit from them.
Please read the instructions for each Overlay to see if it may be beneficial. Table Top Configuration
To Work on Foods and Inorganic Objects  For horizontal use (table or countertop), with a Composite BioDisk (or the Plain BioDisk & BioQuark) and Brass Plate, to treat foods and inorganic objects. There are no Overlays used in this configuration. To Make the Table Top Configuration:
With tape, secure the violet side of Composite BioDisk to the center of the Brass Plate. The visible side will show the rainbow target.
Place this rainbow target side facing down (not visible) on horizontal surface.
Then set a food or beverage onto the Tabletop Configuration for a minimum of 30 seconds. Dan Nelson (founder) states:
"No allergic properties should remain in the food. An example: Had you been allergic to wheat bread, it would not have been optimally attainable to your body until now. After treating the wheat bread on the Tabletop Configuration for 30 seconds, it is now bioavailable to your body." Body Sandwich Configuration
To Work on People  It's called the Body Sandwich Configuration because it’s usually held next to or near a body, and it's made up of a Brass Plate that is "sandwiched" between a Composite BioDisk (or the Plain BioDisk & BioQuark) and Overlay. The Brass Plate is in the center of the sandwich. The purpose is to deliver vibrational information specifically from the Overlay. To Make the Body Sandwich Configuration:
With tape, secure the rainbow target side of the Composite BioDisk to the center (either side) of the Brass Plate (visible side will show violet, rainbow target side is hidden against the Brass Plate).
Then the appropriate or desired Overlay should be centered (again, using tape) onto the Brass Plate, opposite side from the BioDisk. The Brass Plate is in the center of the sandwich, and it does not matter which side of the Brass Plate has the Overlay or BioDisk. Please ensure that the Composite BioDisk is applied to the body, with the overlay facing outwards. It is not advisable to sleep at night with the BioDisk on your body.
Care and Maintenance of Your BioDisk Over time, the BioDisk can become saturated with electromagnetic energy. This saturation can be cleared by placing the disk between two small plastic baggies that have been filled with sea salt. Leave the disk between the baggies for 12 hours to clear it. Please respect this fragile card and learn to keep it safe. Through much use and wear, the BioDisk may start coming apart at its edges. If this happens, you may want to order a new one. If necessary, you can double-laminate it before the edges de-laminate and allow for a breach of the vacuum seal. This will add wear time to your BioDisk. If the metal alloy in the BioDisk is ever exposed to oxygen after its initial vacuum seal, it will hyper-oxygenate and will lose its power and become useless. You will need to order a new one. |
